EN 10219 Square Tube supplier in china
EN 10219 Square Tube supplier in china
EN 10219 Square Tube supplier in china
Steels designated with the letter S are intended for use in applications involving generalized construction. Often S designated steels are used in conjunction with standard EN 10219 to produce pipes. Cold formed EN 10219 Grade S235JR Steel Pipes are well suited for welding structures.
These pipes are essentially referred to as structural hollow sections produced from either non-alloy steels or fine grain steels. The EN 10219 specification is segregated into two parts. While part 1 covers the Technical delivery conditions of the en 10219 pipe. Part 2 covers its dimensions, tolerances, as well as its sectional properties. Cold formed welded structures produced under this standard are available in shapes like square, circular, or rectangular forms. The hollow sectioned en 10219 square tube typically does not require subsequent heat treatment. Grade s235jr steel pipe designated with the letters JR indicate the qualities with specified impact properties at room temperature or its specified impact properties at a temperature of 0℃. Whereas the numeric value in the term EN 10219 S235JR is indicative of its minimum yield strength, which in this case stands at about 235 N/mm2.
EN 10219 pipe in Circular / Rectangular / Square forms
| Standard No | EN 10219 |
| Outside Diameter | 21.3—457.2mm |
| Wall Thickness | 1.8—-14.27mm |
| Circular Dimension Range | 26.9 – 323.9 mm |
| Square Dimension Range | 25×25 – 300×300 mm |
| Rectangular Dim Range | 40×20 – 400×200 mm |
| Length | 6000 – 12 000/18 000 mm |
| Grade | S235JRH |
EN 10219 Square Tube supplier in china
Steels designated with the letter S are intended for use in applications involving generalized construction. Often S designated steels are used in conjunction with standard EN 10219 to produce pipes. Cold formed EN 10219 Grade S235JR Steel Pipes are well suited for welding structures.
These pipes are essentially referred to as structural hollow sections produced from either non-alloy steels or fine grain steels. The EN 10219 specification is segregated into two parts. While part 1 covers the Technical delivery conditions of the en 10219 pipe. Part 2 covers its dimensions, tolerances, as well as its sectional properties. Cold formed welded structures produced under this standard are available in shapes like square, circular, or rectangular forms. The hollow sectioned en 10219 square tube typically does not require subsequent heat treatment. Grade s235jr steel pipe designated with the letters JR indicate the qualities with specified impact properties at room temperature or its specified impact properties at a temperature of 0℃. Whereas the numeric value in the term EN 10219 S235JR is indicative of its minimum yield strength, which in this case stands at about 235 N/mm2.
EN 10219 pipe in Circular / Rectangular / Square forms
| Standard No | EN 10219 |
| Outside Diameter | 21.3—457.2mm |
| Wall Thickness | 1.8—-14.27mm |
| Circular Dimension Range | 26.9 – 323.9 mm |
| Square Dimension Range | 25×25 – 300×300 mm |
| Rectangular Dim Range | 40×20 – 400×200 mm |
| Length | 6000 – 12 000/18 000 mm |
| Grade | S235JRH |
